Filter
Top Products
R4C624Setup Guide
Rev_C
A5 size SETUP.FM
6/15/00 Pass 0
R
Proof Sign-off:
M.Otsuka, CRE M.Moriyama_______
N.Nomoto _______
_______
Checking the print head nozzles
Make sure that the printer is turned off. Hold down the
E
load/eject
button (
➀
in the illustration below) and press the
P
power button (
➁
in
the illustration below) to turn on the printer. Then release both buttons.
Here are sample printouts.
If the nozzle check page does not print satisfactorily (for example, if any
segment of the printed lines is missing), then you should clean the print
head as explained below. If the printout is satisfactory, you are ready to
print your first page. See “Printing Your First Page” for instructions.
Cleaning the print head
Follow the steps below to clean the print head.
1. Make sure that the
P
power light is on and that both the
B
black and
A
color ink out lights are off.
2. Hold down the
T
cleaning button for three seconds.
The printer starts cleaning the print head and the
P
power light
begins flashing. Print head cleaning takes about sixty seconds to
complete.
segments are missing
Print head is clean
Print head needs to be cleaned