Filter
Top Products
Epson Stylus Photo R1800
12 - Epson Stylus Photo R1800 2/05
4. Lift up the printer cover and press in the top of the CD/
DVD tray guide as shown.
5. Lower the CD/DVD tray guide.
6. Place the CD or DVD on the CD tray with the white or
printable side face-up.
To print on a small CD (8 cm), place the small CD ring on
the tray first, then place the CD inside the ring.
Caution: Make sure you always use the small CD ring when
printing 8-cm CDs and that the CD and ring lay flat on the tray;
otherwise the printer may be damaged.
7. Slide the tray into the CD/DVD tray guide. Push in the
tray until the arrows on the tray and the tray guide are
aligned, as shown below.
8. Press the ) paper button to load the CD or DVD into
printing position. It is loaded when the P power button
stops flashing.
9. Use Epson Print CD to design your CD or DVD (for
instructions, see the on-screen Help), then print your CD
or DVD, following the instructions below.
Printing Your Design
After you have created your design and loaded a CD or DVD,
you’re ready to print.
Note: For information on designing CDs and DVDs, see the EPSON
Print CD on-screen Help.
1. Start Epson Print CD, if necessary, and open your design
file.
2. Open the File menu and select
Print.
3. Make sure
EPSON Stylus Photo R1800 is selected, then
click
Print.
Always use
this piece with
8-cm CDs
Push in only until the
arrows are next to
each other
Macintosh
Windows