Filter
Top Products
24 Replacing Ink Cartridges
2. Open the scanner and prop it up with its support.
Caution:
Do not touch the white cable inside the printer or you may
damage it.
3. Press the y Stop button. The print head moves to the
_ position to indicate which cartridge is low or expended.
Caution:
Do not move the print head by hand; this may damage your NX100 Series. Always
press the y Stop button to move it.
4. Press the y Stop button again.
■ If another cartridge is low or expended, it moves to the _ position. Press
the y
Stop button again to see if any more cartridges are low or
expended.
■ If no other cartridges are low or expended, the print head moves to the
replacement position.
nx_tx_100_qg.book Page 24 Wednesday, May 21, 2008 3:20 PM