Filter
Top Products
12 Copying a Document or Photo
Restoring and Cropping Photos
You can restore old, faded photos to their original brilliance. You can also crop
your photos to zoom in on the subject.
Note:
To restore photos larger than 5 × 7 inches, use the NX400 Series software on your
computer.
1. Press the P On button to turn on the NX400 Series.
2. Load 4 × 6-inch, 5 × 7-inch, letter-size, or A4-size Epson photo paper.
3. Place your original photo on the document table.
Note:
You can copy up to 2 photos at the same time. Place
them 0.2 inches (5 mm) apart.
4. Press the Restore button, and press OK.
5. To turn on
Color Restoration, press r and select
On and press OK. (If your photo is not faded, do
not turn on
Color Restoration.)
6. Press
OK again to prescan your photo. You see
these settings over a preview of your photo:
7. To print more than 1 copy, press
+ or – to select
the number.
8. If you want to crop your photos and enlarge the
resulting image area to fit onto your paper, press
Display/Crop.
■ To resize the image area, press + or –.
■ To move the image area, use the arrow buttons.
■ To check the zoomed image, press OK.
After you are done cropping your photo, press
OK.
9. To change print settings, press Menu and select
your settings (see page 13). When you’re done,
press
OK.
10. Press x
Start to begin copying. If you need to cancel copying, press y Stop/
Clear Settings
.