Filter
Top Products
16 Printing From a Memory Card
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the NX400 Series while the memory card access
light is flashing; you may lose data on the card.
Selecting Individual Photos for Printing
You can select individual photos for printing as you view them on the LCD
display screen.
1. Press the
Memory Card button. You see this screen:
2. Press
OK to select View and Print Photos.
3. Press l or r to move through your photos and
display one that you want to print.
4. Press the
+ or – button to select the number of
copies you want of that photo.
5. If you want to crop your photo and enlarge the resulting image area to fit onto
your paper, press
Display/Crop.
■ To resize the image area, press + or –.
■ To move the image area, use the arrow buttons.
■ To check the zoomed image, press OK.
■ To rotate the image area, press Menu.
After you finish cropping your photo, press
OK.
6. Repeat steps 3 through 5 to select more photos, if you want.
7. To change any of the print settings displayed on the screen, press
Menu and
select your settings (see page 20). When you’re done, press
OK.
8. Press x
Start to print. To cancel printing, press y Stop/Clear Settings.
Note:
You can change the way your photos appear on the LCD display screen. Press Setup,
select Maintenance, select Display Format, then select 1-up With Info, 1-up without
Info, or View Thumbnail Images.