Epson PM 290 Printer User Manual


 
65
Printing is too slow.
It takes a few moments for PictureMate to process
your images before printing them.
If PictureMate is in a hot or sunny location, move it
to a cooler place and try printing again.
For faster printing, try these tips:
Don’t print more than 40 pictures at a time.
Photos with borders print faster than borderless
photos.
Turn off special features such as color effects and
red-eye reduction.
JPEG photo files print faster than TIFF files.
Software Installation Problems
Follow the instructions beginning on page 34 to
install your software. Don’t connect PictureMate to
your computer until you are instructed to.
Close other programs, including screen savers and
virus protection software, and try installing again.
Make sure your system meets the requirements
listed in your on-screen User’s Guide.
To print over a network, see the on-screen User’s
Guide for instructions on setting up printing.
Print Quality Problems
You see banding (light lines) in your prints.
The print head may need cleaning. See page 60.
Be sure to print with the glossy or whiter side of
the paper face up.
The Print Pack may need replacing. See page 50.
The print head may need aligning. See page 62.
Your print is grainy.
The print head may need aligning. See page 62.
Your print is blurry or smeared.
Use PictureMate photo paper to ensure proper
saturation, absorption of ink, and quality.
Be sure to print with the glossy or whiter side of
the paper face up.
The print head may need cleaning. See page 60.
The print head may need aligning. See page 62.