Epson C41 Printer User Manual


  Open as PDF
of 3
 
1
Instructional Manual Continuous Ink System for use in Epson Stylus C41/C42/C43
Before using this product, please read and follow all instructions. After opening your package, make sure to check that all the accessories
shown in figures 1-1 through 1-3 below.
Conduct Parts Check:
1. Accessories
a. Continuous Ink System (1) b. Cartridge cover (1) c. Air breather plugs (6)
d. Adhesive pads for tube attachment (8) d. Zip Ties (optional) (6) f. Syringe (1)
Fig.1-1 Fig 1-2 Fig 1-3
2. Set-Up Continuous Ink System (CIS)
a. Before installation, layout all your parts in front of your printer.
b. Check your system for any leakage, and make sure your tubing system is tightly bounded and straight as shown in (Fig. 1-1).
c. Place the CIS on the right hand side of the printer as shown in (Fig. 2-1), and keep it at the same level with the printer.
d. Hold down the ink tank with one hand and unplug the original air stopper (Fig. 2-2).
e. Insert the air breather plugs provided as shown in (Fig. 2-3).
Fig. 2-1 Fig. 2-2 Fig 2-3
3. Cartridge and Cover Installation
a. Open printer cover & unplug the printer.
b. Behind normal cartridge sitting position is a white button, push button in and this allows for the cartridge compartment to move
freely.
c. Remove original cover, and carefully install CIS cover (Fig.3-1 and Fig.3-2).
d. Ensuring that colors correspond, push cartridges all the way down in cartridge compartments.
Fig. 3-1 Fig. 3-2
next