Filter
Top Products
LBI-39224
3-84
VMIM, this represents an operating link between a CIA rack and the
VMIM Controller Board.
Help
Choose the
Help
command button to access the Help function. (Help is
also available by pressing the F1 key.)
Configurable Sites:
The Configurable Sites list box displays all inactive unconfigured
VMIM interface modules. If a VMIM appears in this box, no channel
configuration exists at the CEC/IMC Manager and no active Controller
Board control data link exists at the CEC/IMC for the corresponding
site assignment number, and the VMIM may be selected for
configuration. Any number of these available VMIMs may be selected
at one time to be added to the Configured/Active list box for
configuration.
Configured/Active Sites:
The Configured/Active Sites list box displays VMIMs which have been
added but not yet channel-configured, VMIMs which have had previous
channel configurations performed, and those which have been
previously channel-configured and have an active Controller Board
control data link. Before an interface module can be channel-
configured, it must be listed in the Configured/Active Sites list box.
Any number of the available VMIMs may be selected at one time for
modification in the Site Channel Configuration dialog box. All
selected VMIMs in this list will also be listed in the "
Save As…
"
dialog box that is accessed from the Site Channel Configuration
dialog box. For an explanation of the possible prefixes see Table 1
Configured/Active Sites Prefix Definitions, on page 3-25.