Filter
Top Products
LBI-39224
3-116
for definitions of the three (3) possible levels of Individual
Call functionality each C3 Maestro console may have.
Visual Indicators
Trunked/Failsoft Display
Select this check box to enable the trunked operational status indicators
and Failsoft tones at the console. Selecting this check box will also
display the Audible Trunked/Failsoft Tone check box in the Audio
Indicators group, see the discussion of the Audible Trunked/Failsoft
Tone check box under Audio Indicators for function of this checkbox.
If enabled, the console will sound a Failsoft tone (if the Audible
Trunked/Failsoft Tone check box is selected) in its default unselect
speaker and display one of the following states when a status transition
occurs:
"TRNK"– Trunked Operation
"TRFS" – Combined Trunk / Failsoft Operation
"FS2" – Failsoft Operation
Unselect to disable this function.
Display ID for Alias
Select this check box to display IDs (GID, LID, CID, etc.,) of incoming
calls in the respective console's module title bars. Unselect to display
labels (aliases) of incoming calls.
Caller Display for Unselected Modules
Used to indicate whether or not the dispatcher wants labels displayed on
all incoming calls or just on selected incoming calls.
Numeric Volume Display
Select this check box to display a numeric volume at the console.
Unselect to display a volume bar.
24 Hour Time Format
Select this check box to the display time at the console in a 24-hour
format. Unselect to display the time in a 12-hour format. This option is
not available for C3 Maestro for Windows NT consoles.
Enable Debug Messages/Functions
Select this check box to display debug messages and functions at the
console. This option is not available for C3 Maestro for Windows NT
consoles.
Labeling for Console Call
Select this check box to force alphanumeric alias displays for all
incoming console originated calls. Unselect to force logical displays of