LBI-39224
1-1
1. CHAPTER 1
GETTING STARTED
1.1 ABOUT CEC/IMC MANAGER V5.0
Starting with release (version) 5.0 the CEC/IMC Manager is a 32 bit
Windows NT application. To provide remote management capability
the architecture of the CEC/IMC Manager is Client/Server. The
application is divided into two executables; GUI_SRVR.exe is the
Server application that runs as a Windows NT service, and W_GUI.exe
is the Graphical User Interface (GUI) application run from the ICON
selected in the WINMOM program group. This release of CEC/IMC
Manager also includes an optional SNMP agent that runs as a Windows
NT service. The SNMP agent is required to provide a Network
Management station remote monitoring of the CEC/IMC Manager
directly and the CEC/IMC by proxy. The installation procedure for this
agent is found in APPENDIX C - SNMP AGENT and PROXY for
CEC/IMC (Optional). Once installed, configure the agent in
accordance with the configuration procedures in EDACS
®
Network
Management Installation and Technical Reference Manual (LBI-
39171).
Throughout this program there will be references to configuration data
saved to, stored at, and read/retrieved from the CEC/IMC Manager hard
disk. This hard disk is located at the machine (PC) that the
GUI_SRVR.exe is running from, not the machine running the GUI
application unless the same machine is performing both services. In
most cases, if not all, the machine running the server (GUI_SRVR.exe)
will be local to the CEC/IMC.
The CEC/IMC Manager for Windows NT Client has been ported to
HP-UX platforms to run in conjunction with Network Manager. For
users running an HP-UX version of the CEC/IMC Manager Client all
references in this manual to W_GUI.exe, Graphical User Interface
(GUI), or CEC/IMC Manager for Windows NT Client should be
considered "CEC/IMC Manager HP-UX Client."
1.2 ABOUT THIS MANUAL
This manual describes the CEC/IMC Manager (MOM PC) user
interface and functions. It is intended to aid the user in performing
various CEC/IMC Manager functions such as CEC/IMC configuration