Filter
Top Products
LBI-39224
1-2
and viewing interface module status data. The various screens and
terms the user may encounter are walked through and explained in full
detail. The following sub-sections highlight the major functions of the
CEC/IMC Manager.
1.2.1 System Configuration
CEC/IMC Manager Configuration
– CEC/IMC Manager User Profiles – Configure CEC/IMC
Manager user accounts. This includes user names, passwords,
and access levels.
– CEC/IMC Manager Hardware – Set serial interface baud
rates for System Manager and CEC/IMC Manager,
enable/disable data logging, and set the datalog threshold
number.
– CEC/IMC Manager Font Selection – Select font type and
size for optimum compatibility with Network Manager
platforms.
CEC/IMC Configuration
– Trunked and Console Channels – Adjust audio levels and
other related parameters for each site-type, console, and
EDACS Data Gateway™ (EDG) interface.
– Conventional Channels – Adjust audio levels, type of control
(tone, dc, etc.), and other related parameters for conventional
channel interfaces. Set conventional channels for Causeway
patch or Causeway simulselect operation.
– Digital Voice Channels – Configure digital voice channels for
either pooled (dynamic) or dedicated call assignment
operation.
– Logging Recorders – Configure logging recorder parameters
such as output level and assigned entity (unit, group, etc.).
– TDM Buses – Configure the number of TDM buses to match
number of buses supported by the installed CEC/IMC Audio
Boards.
– TDM Bus Time Slots – Allocate the number of TDM bus
time slots required by each site-type, console, digital voice,