Filter
Top Products
LBI-39224
3-21
will greatly increase the number of slots available, and decreasing the
number of buses will greatly decrease the number of slots available.
Help
Choose the
Help
button to access the Help function. (Help is also
available by pressing the F1 key.)
Cancel
Choose the
Cancel
button to exit the TDM Bus Configuration dialog
box without saving or activating any new settings.
OK
Choose the
OK
button to save any new settings, activate those settings,
exit the TDM Bus Configuration dialog box and return to the
CEC/IMC Manager main window.
3.8 SITE-TYPE INTERFACE MODULE CHANNEL
CONFIGURATION
This section describes channel-related configurations applicable to
"site"-type (MIM, NIM, VMIM, PIM and CTIM) interface modules
that are performed at the CEC/IMC Manager. NIM, VMIM, PIM and
CTIM site-type interface modules do not actually interface with
EDACS trunked sites; however, each interface module is assigned a
unique site assignment number (1 thru 32). Each interface module type
will be discussed separately because, although similar, they do have
slight differences and this is an important step in CEC/IMC switch
setup. Also, some modules may be equipped with the new T1/E1
Interface Card (currently only MIMs, NIMs, and PIMs may be so
equipped). Configuration of both Audio Board-equipped interface
modules and T1/E1 Interface Card-equipped interface modules will be
covered in those cases.