Extron electronic 450 Plus Series Switch User Manual


  Open as PDF
of 10
 
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
Continued
CrossPoint 450 Plus Series
Ultra-Wideband Matrix Switchers with ADSP
™
and IP Link
®
for RGB and Stereo Audio
ultra-wideband rgb & Stereo audio Matrix SwitcherS
coMMon feAtureS
•
Inputs: Video on female BNC connectors; audio on captive screw connectors
•
Outputs: Video on female BNC connectors; audio on captive screw connectors
•
Ultra-wideband 450 MHz (-3 dB) RGB video bandwidth, fully loaded — Designed
for the most demanding, very high resolution computer-video rates without signal
degradation. The CrossPoint 450 Plus Series provides a minimum 450 MHz (-3 dB) of
RGB video bandwidth at full performance capability when one input drives all outputs.
•
Extremely flat response to 130 MHz — Switcher performance is further enhanced
by the extremely flat response in the critical portion of the bandwidth curve, between
0 and 130 MHz.
•
ADSP
™
- Advanced Digital Sync Processing technology — An exclusive, all-digital
process that regenerates the sync signal waveform and restores sync level to 5.0 V p-p,
TTL, specifications. This ensures a stable sync signal for improved signal compatibility
with any LCD, DLP, plasma, or other digital display device.
•
DSVP
™
- Digital Sync Validation Processing — Verifies active sources by polling
all inputs for valid sync signals. DSVP then transmits the horizontal and vertical sync
information to the user through the serial or IP Link ports.
•
Compatible with RGBHV, RGBS, RGsB, HDTV, component video, S-video, composite
video, and unbalanced/balanced stereo audio — All models switch separate
horizontal and vertical sync to ensure proper sync polarity, providing a more stable image.
•
Excellent channel to channel isolation — The CrossPoint 450 Plus provides
excellent isolation between channels and extremely low electromagnetic emissions,
perfect for minimizing signal leakage in high security or government environments.
•
Buffered I/O — Each input and output is individually buffered to provide maximum
performance and virtually no crosstalk or signal interference between channels.
•
Triple-Action Switching
™
for RGB Delay — Blanks the screen when switching to a
new source. The new sync signals precede the RGB signals, so there is no glitch shown
during the transition. The time delay between the RGB and sync signals is adjustable up
to five seconds through front panel, IP Link, or serial control.
•
HVA models switch both balanced and unbalanced stereo audio
•
Audio input gain and attenuation — Allows users to set the level of gain or
attenuation for each audio input channel, eliminating noticeable volume differences
when switching between sources.
•
Audio output volume adjustment and muting — Can be set dynamically for each
channel through the front panel or serial control, eliminating the need for an audio
preamplifier in many system designs.
•
Audio breakaway — Provides the capability to break an audio signal away from its
corresponding video signal, allowing the audio and video signals from one source to be
switched to different destinations.
•
View I/O mode — Users can easily view which inputs and outputs are actively connected.
•
I/O grouping — Allows the matrix switcher to be virtually divided into smaller
sub-switchers, making installation and control easier. I/O grouping allows specific
outputs, like those designated for a specific video format, to be grouped together.
•
Rooming — All models can be programmed to group selected outputs into specific
"rooms," each with its own set of unique presets. Each room can support up to 16
outputs. A total of 10 rooms, with 10 presets per room, are available.
•
Global presets — Frequently used I/O configurations may be saved and recalled
either from the front panel, IP Link, or serial control. This time-saving feature allows I/O
configurations to be set up and stored in memory for future use.
•
QS-FPC
™
- QuickSwitch Front Panel Controller — Provides a discrete, backlit button
for each input and output, allowing for simple, intuitive operation.
•
Tri-color, backlit buttons — Can be custom labeled for easy identification. The
buttons illuminate red, green, or amber, depending on function, for ease of use in
low-light environments.
•
Front panel security lockout — Prevents unauthorized use in non-secure
environments. In lockout mode, a special button combination is required to operate the
switcher from the front panel controller.
•
IP Link
®
Ethernet monitoring and control — Engineered to meet the needs of
professional A/V environments, IP Link enables the CrossPoint 450 Plus matrix
switchers to be proactively monitored and managed over a LAN, WAN, or the Internet,
using standard TCP/IP protocols. IP Link provides for remote selection of input and
output ties, adjustment and control of audio input and output levels, and advanced
system diagnostics.
•
IP Link enhanced diagnostics — Provides for monitoring of internal product operating
temperature and power supply voltages, e-mail notification of input signal loss, and
other critical service information.
•
RS-232 and RS-422 serial control port — Using serial commands, the CrossPoint
450 Plus Series can be controlled and configured via the included Windows-based
control software, or integrated into third-party control systems. Extron products
use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code
commands that allow for quick and easy programming. The RS-232 and RS-422 port
also makes it easy to install firmware updates.
•
Control software — Provides a graphical, drag-and-drop interface for I/O configuration
and other customization functions via RS-232 and RS-422 remote control. This software
also offers an emulation mode for configuration of an offsite matrix switcher; the I/O
configuration may be saved for future downloading to the matrix switcher.
339
next