Filter
Top Products
1-2 MSG Series Switchers • Specifications
Specifications — MSG Series Switchers
Video
Routing
MSG0804-3, MSG0804-4, MSG0804HR-3, MSG0804HR-4
8 x 4 matrix
MSG0808-3, MSG0808-4, MSG0808HR-3, MSG0808HR-4
8 x 8 matrix
Gain ............................................... Unity (with 75 ohm termination)
Bandwidth
MSG0804-3, MSG0804-4, MSG0808-3, MSG0808-4
225 MHz (-3dB), fully loaded
MSG0804HR-3, MGS0804HR-4, MSG0808HR-3, MSG0808HR-4
475 MHz (-3dB), fully loaded
Differential phase error .............. 0.05º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.1% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -60dB @ 5 MHz
Switching speed ........................... 50 ms (max.)
Video input
Number/signal type ................... 8 RGBHV, RGBS, RGsB, RsGsBs, component video (YUV; YPRPB; Y, R-Y, B-Y),
S-video, composite video
Connectors .................................... 8 x 5 female BNC
Nominal level............................... 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... Analog: 1.5V p-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-60dB @ 5 MHz
Maximum DC offset .................... (Note: min./max. levels include any DC offset)
External sync (genlock)............... 2.0V to 5.0V p-p
Video output
Number/signal type
MSG0804-3, MSG0804-4, MSG0804HR-3, MSG0804HR-4
4 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
MSG0808-3, MSG0808-4, MSG0808HR-3, MSG0808HR-4
8 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
Connectors
MSG0804-3, MSG0804-4, MSG0804HR-3, MSG0804HR-4
4 x 5 female BNC
MSG0808-3, MSG0808-4, MSG0808HR-3, MSG0808HR-4
8 x 5 female BNC
Nominal level............................... 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... ±5V p-p to a 75 ohm load
Impedance .................................... 75 ohms
Return loss .................................... -45dB @ 5 MHz
DC offset ....................................... ±1.5mV maximum with input at 0 offset
Switching type ............................. Triple-Action (RGB delay), or vertical interval (if genlocked)
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs
Genlock connectors ..................... 2 BNC female
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM