Filter
Top Products
Specifications — RGB 580xi, RGB 580xi AAP models
Video — RGB 580xi
Gain ............................................... 0.35 V to 1.45 Vp-p
Bandwidth .................................... 300 MHz (-3 dB)
Video input — RGB 580xi
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 1 female 15-pin HD
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ...... Analog: 0.3 V to 1.45 Vp-p with no offset
Impedance .................................... 75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected)
Horizontal frequency .................. Autoscan 15 kHz to 150 kHz
Vertical frequency ....................... Autoscan 40 Hz to 140 Hz
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... 2.0 V
Video input — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 1 female 15-pin HD
Video output — RGB 580xi
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB
Connectors .................................... 5 BNC female
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ...... 0.35 V to 1.45 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Video output — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB
Connectors .................................... 1 female 15-pin HD
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB
Input level ..................................... 2 V to 5.5 Vp-p with ±0.2 VDC offset max.
Output level.................................. TTL: 4 V to 5 Vp-p, unterminated
Input impedance .......................... 510k ohms
Output impedance ...................... 75 ohms
Max. propagation delay .............. 85 ns
Max. rise/fall time ....................... 2 ns
Polarity .......................................... RGBHV: Polarity follows input when RGBHV is input and the sync polarity switch
is set to Off. Sync polarity is negative if the sync polarity switch is set to On.
RGBS, RGsB: negative
Audio
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N ................................................ >90 dB at maximum output, balanced (unweighted)
Stereo channel separation .......... >90 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type ................... 1 PC level stereo, unbalanced
Connectors .................................... (1) 3.5 mm stereo mini audio jack (female) (tip, ring, sleeve)
1-2 RGB 580xi, RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP • Specifications