Filter
Top Products
1-2 SW 2 AR MX, SW 4 AR MX, and SW 6 AR MX Switchers • Specifications
Specifications — SW 2/4/6 AR MX Switchers
Video
Gain ............................................... Unity
Bandwidth .................................... 600 MHz (-3dB), fully loaded
Crosstalk ....................................... -70dB @ 10 MHz
Video input
Number/signal type ................... 2, 4, or 6 analog VGA-UXGA RGBS, RGsB, RsGsBs, component video, S-video or
NTSC/PAL/SECAM composite video
Connectors.................................... 2, 4, or 6 x 4 BNC female
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss .................................... -30dB @ 10 MHz
External sync (genlock)............... SW 4 and 6 AR MX only ........0.3V to 0.4V p-p
Video output
Number/signal type ................... 1 analog VGA-UXGA RGBS, RGsB, RsGsBs, component video, S-video or
NTSC/PAL/SECAM composite video
Connectors.................................... 4 BNC female
Minimum/maximum levels ...... Analog ....... -5.0V to +5.0V p-p
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
DC offset ....................................... ±5mV maximum
Sync
Input type ..................................... 2, 4, or 6 analog RGBS, RGsB, RsGsBs
Output type .................................. 1 analog RGBS, RGsB, RsGsBs
Standards ...................................... NTSC, PAL, SECAM
Input level..................................... 0.5V to 5V p-p
Output level.................................. Same as input
Input impedance.......................... 510 ohms
Output impedance ...................... 75 ohms
Max. propagation delay.............. 40 ns
Max. rise/fall time....................... 4 ns
Polarity .......................................... Positive or negative
Control/remote — switcher
Serial control port ........................ RS-232, 9-pin D female connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations.... 2 = TX, 3 = RX, 5 = GND
Contact closure ............................ 25-pin D female connector
Extron remote key pad control.. Extron KP 10 keypad..............connects to the 25-pin D female connector
IR controller module ................... Extron IR 101 ........................... connects to the RS-232 9-pin D female connector
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set
™ – SIS™
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount................................... Yes, with optional 2U front panel #60-141-01 or 2U universal rack shelf #60-032-01
Enclosure type.............................. Metal