Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
169
Using the Image Color tab (continued)
Step Procedure
4 Control the amount of heat the Printer uses (a) when printing with the resin black
panel of a full-color Ribbon or (b) when printing with a resin-only Ribbon by
adjusting the Resin Heat slide. See the Printer Components: Print Ribbons
description in Section 1, page 44.
Move the slide to the left to cause less heat to be used in the printing process,
causing resin images to be lighter or less saturated.
OR
Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text and
bar codes. See the Resolving the excessive Resin Printing problems procedure in
Section 2, page 124.)
Continued on the next page