Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
258
Print TOF and Print EOF Alignment Procedures
The Print TOF and Print EOF procedures must be performed as a single alignment process.
The goal of these procedures is to align the printed image to precisely line up with the edges
of the card as shown below. Notice that when aligned properly, the test print's Alignment
Arrows will fall just inside the edges of the card.
This information pertains to the two procedures on the next page:
Alignment Test Image: The alignment test image is designed for setting these
parameters. Be sure to run this test after each adjustment. Run the Alignment Test Image
by selecting the following options: MENU, Print Test Image and Gray/Align YMC
(DTC510/515) or Gray/Align YMC/K (DTC520/525).
Value and Settings Changes: Change the settings in the procedures below by
choosing the following options: MENU, Setup Printer and the parameter to be changed.
Change the value by pressing the appropriate scroll button and press SELECT to save
the value.
Continued on the next page