Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
315
Repackaging the Printer (continued)
Step Procedure
5 Replace the L000107 Quick Start Guide with the new Guide.
6 Replace the Installation CD with the new CD.
7 Carefully tape shut the supply pack after it is updated.
8 Package the Card Weights.
a. Place the card weights into the poly bag (260176). (Note: Ensure there is
one Card Weight per Hopper.)
b. Place the bag with the power cords into the poly bag.
c. Tape the poly bag closed.
9 Re-box the Printer.
a. Carefully lay the Printer onto its front and pull on the poly bag.
b. Carefully lift the Printer over onto its back, neatly fold the bag, and tape it to
the bottom of the Printer.
c. Carefully set the Printer on the Output end and place the foam onto the
Input end of the Printer.
d. Carefully flip the Printer over onto the foam and place the other foam piece
onto the output end.
e. Place the Printer into the bottom of the box.
f. Load the Cord bag into the corner of the box next to the front Output side of
the Printer (with the weights facing the box).
g. Put on the Top Box, and insert both the Handles and the lock.