Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 6.0)
100
Resolving the incorrect Image Darkness problems
Symptom: Printed cards are too dark or too light, as shown on the next page.
Step Procedure
1 Run a Self-Test from the Printer. See the Printing the Self-test in Section 8, page
238.
a. Select Menu from the LCD.
b. Select Print Test Image from the menu.
c. Select Gray/Align Self-test from the Menu.
d. If the Self test card does not appear to have the same darkness issues,
continue to step 2 (Adjusting the Dye sub intensity).
e. If the Self test card does appear to have the same darkness issues, continue
to step 3 (Adjusting the image darkness).
2 Adjust the Dye-Sub Intensity setting within the Image Color tab of the Printer
driver. See the Using the Image Color tab procedure in Section 3, page 148.
a. Open the Printer control panel from the computer.
If using Windows 95/98/ME, right click on the DTC500 Series Card Printer
Icon and select Properties.
If using Windows NT 4.0, right click on the DTC500 Series Card Printer and
select Document Defaults.
If using Windows 2000/XP, right click on the DTC500 Series Card Printer
and select Printing Preferences.
b. Click on the Image Color tab.
If the image is too light, adjust the Dye-Sub Intensity to a more positive
value.
If the Image is too dark, adjust the Dye-Sub Intensity to a more negative
value.
OR
Correct the Image Darkness in the LCD. See the Adjusting the Image Darkness
procedure in Section 8, page 248.
a. Select Menu from the LCD.
b. Select Setup Printer and then select Image Darkness.
If the image is too light, adjust the current value to a more positive number.
If the Image is too dark, adjust the current value to a more negative
number.
Continued on the next page