FARGO electronic DTC500 Series Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 6.0)
224
Cleaning the Printer's Exterior
The Printer has a durable casing that should retain its luster and appearance for many years.
Clean it only with a Cleaning Pad from the Printer Cleaning Kit. (Note: See the next section
for a photo of Printers exterior.)
Caution: Do not use cleaning solvents of any kind or spray the cabinet with a
cleaner!
Cleaning the Printer's Interior
Caution: The Printer, dust and other particles can accumulate inside the Printer.
These particles are attracted to the print Ribbon or blank card by static produced during
printing and can contaminate the printed card causing spots or speckles to appear.
Periodically, use the following procedure to remove dust and other contaminants:
Steps
Procedure
1 Open the Printer's Top Cover and Print Station. See the next page.
2 Remove the print Ribbon from the Printer.
3 Use a Cleaning Pad from the Printer Cleaning Kit to wipe out all visible areas
inside the Printer. Remove any debris within its interior.
Caution: Be extremely careful not to let any alcohol drip inside the
Printer.
4 Re-install the printing supplies and close the Printer. See the next page.