FARGO electronic 400 Printer User Manual


 
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
4-51
Resolving the Image Placement problems (continued)
Step Procedure
4 Verify if the Vertical Image Position Setting is set correctly or incorrectly. See
the graphic below.
If the white border is on the top edge of the card, adjust the Vertical value
by +2.
If the white border is on the bottom edge of the card, adjust the Vertical
value by -2.
a. Click on OK.
b. Run a self-test.
c. If the white border is diminished, continue the adjustment until it is gone.
Graphic B