Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
6-19
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees
options
Use this option to change the position of the printed image in relation to the location of a
card's Magnetic Stripe or smart chip.
Step Procedure
1 Select Rotate Front 180 Degrees to rotate the image on the front of the card
by 180 degrees when printed.
OR
Select Rotate Back 180 Degrees to rotate the image on the back of the card
by 180 degrees when printed.