Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
6-81
Selecting the Defined Area(s) function (continued)
Step Procedure
6 Define another area by clicking the Defined Area up arrow. (Note: Another .2" x
.2" / 5mm x 5mm area will appear in the lower left-hand corner. This is the
location in which all newly defined areas will first appear.)
7 Use the Defined Area arrows to navigate back and forth from area to area.
(Note: The active area will always be highlighted with a dotted outline. Up to 5
areas can be defined.)
Size and position each area as it is created because additional areas cannot be
added until the most recently created area has been moved or sized.
8 Delete an area by using the Defined Area arrows to select the area and clicking
Delete. (Note: If all areas are deleted, the K Panel Resin options will
automatically be deselected.)