Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.6)
v
Reviewing the Current Settings _____________________________________________________ 5-17
Switching to the automatic IP address mode ___________________________________________ 5-18
Changing to the static IP address mode _______________________________________________ 5-19
Entering the TCP Window Size _____________________________________________________ 5-21
Using the Clear Changes button _____________________________________________________ 5-22
Using the Print Path page ____________________________________________________________ 5-23
Using the Ribbon Information page ____________________________________________________ 5-25
Using the TCP/IP page ______________________________________________________________ 5-26
Using the TCP/IP Status Web Page __________________________________________________ 5-27
Using the Printer page_______________________________________________________________ 5-28
Using the System Log page___________________________________________________________ 5-30
Changing the Log Name___________________________________________________________ 5-31
Selecting the Log Type____________________________________________________________ 5-33
Selecting the Log Destination_______________________________________________________ 5-34
Setting up Email Event logging _____________________________________________________ 5-35
Specifying UDP Event logging _____________________________________________________ 5-36
Specifying TCP Event logging______________________________________________________ 5-38
Using the Administration pages _______________________________________________________ 5-40
Using the System Information page __________________________________________________ 5-40
Changing the Root Password _______________________________________________________ 5-42
Upgrading the Print Server_________________________________________________________ 5-44
Using the Reboot pages______________________________________________________________ 5-46
Rebooting the Ethernet Server ______________________________________________________ 5-46
Resetting to Default Settings _______________________________________________________ 5-48
Using the Help page ________________________________________________________________ 5-49
Additional Procedures ________________________________________________________5-50
Reviewing LED and Dipswitch Tables __________________________________________________ 5-50
Reviewing the LED Table _________________________________________________________ 5-50
Reviewing the Dip Switches________________________________________________________ 5-51
Upgrading the Main Firmware with the Fargo Workbench Printer Utility _______________________ 5-52
Restoring the Factory Settings for Ethernet ______________________________________________ 5-54
Restoring the Default Settings ______________________________________________________ 5-54
Accessing the IP address of your Printer_________________________________________________ 5-55
Accessing the DTC400 IP address ___________________________________________________ 5-55
Ethernet Printer Troubleshooting Procedures _____________________________________________ 5-56
Troubleshooting procedures ________________________________________________________ 5-56
Verifying the Printer Connection ____________________________________________________ 5-57
Verifying the Printer IP address _____________________________________________________ 5-57
Verifying that your PC can access the Printer using the ping command ______________________ 5-58
Printing a test page _______________________________________________________________ 5-59
Reviewing Frequently-asked Questions __________________________________________5-60
Glossary of Terms ____________________________________________________________5-66
Section 6: Printer Adjustments_______________________________________________6-1
DTC400 Print Driver Options __________________________________________________________ 6-2
Using the Card tab (DTC400) __________________________________________________________ 6-2
Adjusting the Card Size Option ______________________________________________________ 6-2
Adjusting the Orientation Option _____________________________________________________ 6-3
Selecting the number of copies_______________________________________________________ 6-4
Using the Diagnostics button under the Card tab _________________________________________ 6-5
Using the Clean Printer Option_______________________________________________________ 6-6
Using the Test Print button__________________________________________________________ 6-8
Using the About button_____________________________________________________________ 6-9
Using the Device Options tab (DTC400) ________________________________________________ 6-10