Fellowes 120C-2 Paper Shredder User Manual


 
4
English
Set-Up
•Turn retractable feet (D) to outward position. This will improve stability. The feet should be
turned outward if shredder will not be placed between furniture.
Pull waste basket drawer (A) completely out of cabinet.
Put waste bag in basket (sample bags provided). Allow edges to overhang. Contact
Fellowes to order more bags. (Part #36054).
Slide waste basket drawer (A) into cabinet. The shredder will not operate if drawer is not
pushed all the way into cabinet.
Plug power cord into a convenient outlet.
Operation
Control Switches
Control Switch (E)
I AUTOMATIC
Turns on the automatic-start
sensor and the green Ready
light.
O OFF
Turns off the automatic-start
sensor and the green Ready
light.
R REVERSE
Runs shredder in reverse mode.
Press and hold to activate.
Manual Forward Button (G)
Runs shredder when
button is held down.
E
F
G
I
H
J
Troubleshooting Lights
Ready Light (F)
(Green)
Shredder is in automat-
ic start mode.
Basket Ajar (H)
Waste basket drawer is
open.
Basket Full (I)
Waste basket is full or
paper has collected
under cutting cylinders.
Paper Jam (J)
Shredder is jammed
(e.g., too much paper
fed at one time).
For convenience and energy savings, your shredder is equipped with an
automatic-
start sensor
(K). This means that when the control switch (E) is in the automatic [I] posi-
tion, the shredder will start running when you put paper into it and stop a few seconds
after the paper has passed through.
CAUTION:
The automatic-start sensor cannot tell the difference
between paper and other objects. This feature can also be a hazard.
Always turn off the shredder when it is not in use. Unplug the shredder
if it will not be used for an extended period.
To shred
• Press control switch (E) to automatic [I] position. Green ready light (F) should turn on.
• Feed paper straight into entry (C), releasing when shredder begins shredding; see
Product Profile for limits on paper width, shreddable items, sheet capacity, etc.