Filter
Top Products
101-00310-02
C-Series FlexMedia Card: 36 Ports 10/100/1000 Base-T
Ethernet (PoE and non-PoE), 8 Ports 1G, 2 Ports 10G
Feature Highlights and Installation Instructions
Feature Highlights
• There are two versions of the FlexMedia card, differing only in Power over Ethernet (PoE) support:
• Catalog # LC-CB-10G-1G-36V (c
ard type E36VB): PoE support to 15.4 Watts/port on 10/100/1000 ports
• Catalog # LC-CB-10G-1G-36T (ca
rd type E36TB): non-PoE
• 36 ports with RJ-45 connectors support auto-negotiat
ion or 10/100/1000 Base-T speed, full and half duplex.
• 8 ports use approved 1G Small-form F
actor Pluggable (SFP) optical transceivers.
• 2 ports use approved 10G Small-form Factor Pl
uggable (SFP+) optical transceivers.
• SFP+ ports support SR and LR media modules (only Force
10-specific modules are recognized by the card.).
Note: FTOS 7.7.1.0 does not allow non-qualified SFP+ modules, which can cause board damage.
• The CB series line cards support th
e following CAM configurations:
• 12K Layer 3 IP forward information base (FIB)
• 16K Layer 2 FIB
• 768 Layer 2 access control list (ACL) entries
• 768 Layer 3 access control list (ACL) entries
• Support for online insertion and removal (OIR) of line card.
• Support for ingress Layer 2 and Layer 3 ACL processing across all ports.
Installation Notes:
• The chassis into which this line card is installed
must be running FTOS version 7.7.1.0 or later
and boot code 2.6.0.2 or later.
• Only the non-PoE version of the card works in a DC-powered chassis.
LED Description
10/100/1000Base-T Green blinking: Link detected/activity
Green solid: Link detected/no activity
Off: No link/card offline
Amber solid: 1G speed
Amber blinking: 100M speed
Off: 10M speed
1000Base-X Green: Operational/no activity
Green blinking: activity
Off: No link/card offline
Green: On
100Base-FX Green: Operational/no activity
Green blinking: activity
Off: No link/card offline
Yellow: On
Card Status LED Green: operational
Green blinking: booting/ diagnostics
Red: card problem
Unlit: in standby mode or power is off
Port Type Link Status (Left Side LED) Speed (Right Side LED)