Filter
Top Products
- 138 -
Syntax
link state [group | [enable <1-6>]]
no link state [group <1-6> | [enable <1-6>]]
no - This command disables link state function.
Command Mode
Global Config
7.2.14.3 link state group
Set upstream port or downstream port for a link state group. Use ‘link state group <group id> upstream’ to
set the port to be monitored.
Syntax
link state group <1-6> {downstream | upstream}
no link state group <1-6> {downstream | upstream}
no - This command disables link state group function.
Command Mode
Interface Config
7.2.15 Port Backup
7.2.15.1 show port backup
Show port-backup information.
Syntax
show port-backup
Command Mode
Privileged EXEC
Display Message
Admin Mode: Indicates whether or not port-backup is active on the switch.
Group ID: The Group ID for each displayed row.