Filter
Top Products
- 149 -
Disabled
Command Mode
Interface Config
7.2.18.4 congestion-notify tag
The user can go to the CLI Global Configuration Mode to configure the CNTAG Ether Type is recognized
by parsing stages. Use the ‘congestion-notify tag ethertype recognize’ global configuration command.
Use the ‘no congestion-notify tag ethertype recognize’ to configure CNTAG Ether Type is unrecognized.
Syntax
congestion-notify tag ethertype recognize
no congestion-notify tag ethertype recognize
no - This command disables CN tag processing.
Default Setting
Disabled
Command Mode
Global Config
The user can go to the CLI Global Configuration Mode to configure the Ether Type of CN-TAG. Use the
‘congestion-notify tag ethertype <value>’ global configuration command. Use the ‘no congestion-notify
tag ethertype’ to configure CN-TAG Ether Type to default value..
Syntax
congestion-notify tag ethertype <0-65535>
Default Setting
0x22e9
Command Mode
Global Config