Filter
Top Products
- 164 -
no - This command sets the value to the default.
Default Setting
24
Command Mode
Line Vty
7.3.3.7 maxsessions
This command specifies the maximum number of remote connection sessions that can be established. A
value of 0 indicates that no remote connection can be established. The range is 0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no - This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Line Vty
7.3.3.8 server enable
This command enables/disables telnet server. If telnet server is enabled, all telnet sessions can be
established until there are no more sessions available. If telnet server is disabled, all telnet sessions are
closed.
Syntax
server enable
no server enable
no - This command disables telnet server. If telnet server is disabled, all telnet sessions are droped.
Default Setting
Enabled
Command Mode
Line Vty