Filter
Top Products
- 214 -
7.4.2.9 spanning-tree hold-count
This command sets the Bridge Tx Hold Count parameter to a new value for the common and internal
spanning tree. The Tx Hold Count value is in a range of 1 to 110.
Syntax
spanning-tree hold-count <1-10>
no spanning-tree hold-count
<1-10> - the Maximum hold-count value (Range: 1-110).
no - This command sets the Bridge Tx Hold Count parameter for the common and internal spanning
tree to the default value.
Default Setting
6
Command Mode
Global Config
7.4.2.10 spanning-tree mst
This command adds a multiple spanning tree instance to the switch. The instance <1-3965> is a number
within a range of 1 to 3965 that corresponds to the new instance ID to be added. The maximum number of
multiple instances supported is 4.
Syntax
spanning-tree mst instance <1-4094>
no spanning-tree mst instance <1-4094>
<1-4094> - multiple spanning tree instance ID.
no - This command removes a multiple spanning tree instance from the switch and reallocates all
VLANs allocated to the deleted instance to the common and internal spanning tree. The instance
<1-4094> is a number that corresponds to the desired existing multiple spanning tree instance to be
removed.
Default Setting
None
Command Mode
Global Config