Filter
Top Products
- 222 -
7.4.2.16 spanning-tree tcnguard
This command sets the TCN Guard parameter to prevent a port from propagating topology change
notifications.
Syntax
spanning-tree tcnguard
no spanning-tree tcnguard
no - This command sets the tcnguard parameter to the default value, that is Disabled.
Default Setting
Disabled
Command Mode
Interface Config
7.5 System Log Management Commands
7.5.1 Show Commands
7.5.1.1 show logging
This command displays logging.
Syntax
show logging
Default Setting
None
Command Mode
Privileged Exec
Display Message
Logging Client Local Port The port on the collector/relay to which syslog messages are sent
CLI Command Logging The mode for CLI command logging.
Console Logging The mode for console logging.