Filter
Top Products
- 236 -
passwords aging <1-365>
no passwords aging
<1-365> - Number of days until password expires.
Default Setting
0
Command Mode
Global Config
7.7.2.6 Set the password history
The user can go to the CLI Global Configuration Mode to set the password history, use the passwords
history <0-10> Global configuration command. Use the no passwords history return to default value 0.
If password history is set, the local user will not be able to reuse any password stored in password history
when the local user changes his or her password.
Syntax
passwords history <0-10>
no passwords history
<0-10> - Number of passwords to be used in password history check.
Default Setting
0
Command Mode
Global Config
7.7.2.7 Set the password lock-out count
The user can go to the CLI Global Configuration Mode to set the password lock-out count, use the
passwords lock-out <1-5> Global configuration command. Use the no passwords lock-out to return to
default value 0.
Syntax
passwords lock-out <1-5>
no passwords lock-out
<1-5> - the number of password failures before account lock.