Filter
Top Products
- 269 -
7.8.6.6 port-security violation shutdown
This command configures the port violation shutdown mode. Once the violation happens, the interface
will be shutdown.
Syntax
port-security violation shutdown
no port-security violation
no - This command restore violation mode to be default.
Default Setting
None
Command Mode
Interface Config
7.9 CDP (Cisco Discovery Protocol) Commands
7.9.1 Show Commands
7.9.1.1 show cdp
This command displays the CDP configuration information.
Syntax
show cdp
Default Setting
None
Command Mode
Privileged Exec
Display Message
CDP Admin Mode: CDP enable or disable