Filter
Top Products
- 285 -
Syntax
show lldp interface {<slot/port> | all}
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Shows the interface in a slot/port format.
Link: Shows whether the link is up or down.
Transmit: Shows whether the interface transmits LLDPDUs.
Receive: Shows whether the interface receives LLDPDUs.
Notify: Shows whether the interface sends remote data change notifications.
TLVs: Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0
(Port Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt: Shows whether the interface transmits system management address information in the
LLDPDUs.
7.12.1.3 show lldp statistics
This command uses to display the current LLDP traffic and remote table statistics for a specific interface
or for all interfaces.
Syntax
show lldp statistics {<slot/port> | all}
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Last Update: Shows the amount of time since the last update to the remote table in days, hours,
minutes, and seconds.
Total Inserts: Total number of inserts to the remote data table.