Filter
Top Products
- 460 -
8.3.2.32 default-metric
default-metric command is used to set a default for the metric of distributed routes.
no default-metric command is used to set a default for the metric of distributed routes.
Syntax
default-metric <1-16777214>
no default-metric
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.33 distance ospf
distance ospf command sets the route preference value of OSPF in the router. Lower route preference
values are preferred when determining the best route. The type of OSPF route can be intra, inter, or
external. All the external type routes are given the same preference value. The range of <preference>
value is 1 to 255. no distance ospf command sets the default route preference value of OSPF routes in
the router. The type of OSPF can be intra, inter, or external. All the external type routes are given the
same preference value.
Syntax
distance ospf {intra-area <1-255> | inter-area <1-255> | external <1-255>}
no distance ospf {intra-area | inter-area | external}
Default Setting
110
Command Mode
Router OSPF Config Mode
8.3.2.34 distribute-list out
Use distribute-list out command to specify the access list to filter routes received from the source
protocol.
no distribute-list ou command to specify the access list to filter routes received from the source
protocol.