- 468 -
Default Setting
Disabled
Command Mode
Router OSPF Config Mode
8.3.2.51 timers spf
Use this command to configure the SPF delay time and hold time. The valid range for both parameters is
0-65535 seconds..
Syntax
timers spf <delay-time> <hold-time>
Default Setting
delay-time—5
hold-time—10
Command Mode
Router OSPF Config Mode
8.4 BOOTP/DHCP Relay Commands
8.4.1 Show Commands
8.4.1.1 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Syntax
show bootpdhcprelay
Default Setting
None
Command Mode
Privileged Exec