Filter
Top Products
- 472 -
- a route will be included in updates sent to the router from which it was learned, but the metric will be
set to infinity. The default is simple
Auto Summary Mode: Select enable or disable from the pulldown menu. If you select enable groups
of adjacent routes will be summarized into single entries, in order to reduce the total number of
entries. The default is enabled.
Host Routes Accept Mode: Select enable or disable from the pulldown menu. If you select enable
the router will be accept host routes. The default is enabled.
Global Route Changes: The number of route changes made to the IP Route Database by RIP. This
does not include the refresh of a route's age.
Global queries: The number of responses sent to RIP queries from other systems. Default Metric
Sets a default for the metric of redistributed routes. This field displays the default metric if one has
already been set or blank if not configured earlier. The valid values are (1 to 15).
Default Metric: Sets a default for the metric of redistributed routes. This field displays the default
metric if one has already been set or blank if not configured earlier. The valid values are (1 to 15).
Default Route Advertise: The default route.
Distance: Configured distance value for rip routes.
8.5.1.2 show ip rip interface
This command displays information related to a particular RIP interface.
Syntax
show ip rip interface <slot/port>
< slot/port > - Interface number
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Valid slot and port number separated by forward slashes. This is a configured value.
IP Address: The IP source address used by the specified RIP interface. This is a configured value.
Send version: The RIP version(s) used when sending updates on the specified interface. The types
are none, RIP-1, RIP-1c, and RIP-2. This is a configured value.
Receive version: The RIP version(s) allowed when receiving updates from the specified interface.
The types are none, RIP-1, RIP-2, Both. This is a configured value.
RIP Admin Mode: RIP administrative mode of router RIP operation; enable, disable it. This is a
configured value.
Link State: Indicates whether the RIP interface is up or down. This is a configured value.
Authentication Type: The RIP Authentication Type for the specified interface. The types are none,
simple, and encrypt. This is a configured value.