Filter
Top Products
- 477 -
split-horizon {none | simple | poison}
no split-horizon
none - This command sets without using RIP split horizon mode.
simple - This command sets to use simple split horizon mode.
poison - This command sets to use poison reverse mode.
no - This command cancel to set the RIP split horizon mode and sets none mode.
Default Setting
Simple
Command Mode
Router RIP Config
8.5.2.9 distribute-list
This command is used to specify the access list to filter routes received from the source protocol. Source
protocols have OSPF, Static, and Connected.
Syntax
distribute-list <1-199> out {ospf | static | connected}
no distribute-list <1-199> out {ospf | static | connected}
<1 - 199> - Access List ID value. The Access List filters the routes to be redistributed by the source
protocol.
no - This command is used to cancel the access list to filter routes received from the source protocol.
Default Setting
0
Command Mode
Router RIP Config
8.5.2.10 redistribute
This command configures RIP protocol to redistribute routes from the specified source protocol/routers.
There are five possible match options. When you submit the command redistribute ospf match
<matchtype> the match-type or types specified are added to any match types presently being
redistributed. Internal routes are redistributed by default. Source protocols have OSPF, Static, and
Connetced. Match types will have internal, external 1, external 2, nssa-external 1, and nssa-external 2.