Filter
Top Products
- 480 -
rip2
Command Mode
Interface Config
8.6 Router Discovery Protocol Commands
8.6.1 Show Commands
8.6.1.1 show ip irdp
This commands displays the router discovery information for all interfaces, or a specified interface.
Syntax
show ip irdp {<slot/port> | all}
<slot/port> - Show router discovery information for the specified interface.
<all> - Show router discovery information for all interfaces.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Ad Mode: Displays the advertise mode which indicates whether router discovery is enabled or
disabled on this interface.
Advertise Address: Addresses to be used to advertise the router for the interface.
Max Int: Displays the maximum advertise interval which is the maximum time allowed
between sending router advertisements from the interface in seconds.
Min Int: Displays the minimum advertise interval which is the minimum time allowed
between sending router advertisements from the interface in seconds.
Hold Time: Displays advertise holdtime which is the value of the holdtime field of the router
advertisement sent from the interface in seconds.
Preferences: Displays the preference of the address as a default router address, relative to other
router addresses on the same subnet.