Filter
Top Products
- 499 -
Default Setting
None
Command Mode
Privileged Exec
User EXEC
Display Message
IGMP Admin Mode: This field displays the administrative status of IGMP. This is a configured
value.
Interface: Valid slot and port number separated by forward slashes.
Interface Mode: This field indicates whether IGMP is enabled or disabled on the interface. This is a
configured value.
Protocol State: This field indicates the current state of IGMP on this interface. Possible values are
Operational or Non-Operational.
9.2.1.2 show ip igmp groups
This command displays the registered multicast groups on the interface. If “detail” is specified this
command displays the registered multicast groups on the interface in detail.
Syntax
show ip igmp groups <slot/port> [detail]
<slot/port> - Valid slot and port number separated by forward slashes.
[detail] - Display details of subscribed multicast groups.
Default Setting
None
Command Mode
Privileged Exec
Display Message
IP Address: This displays the IP address of the interface participating in the multicast group.
Subnet Mask: This displays the subnet mask of the interface participating in the multicast group.
Interface Mode: This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled:
Querier Status: This displays whether the interface has IGMP in Querier mode or Non-Querier
mode.
Groups: This displays the list of multicast groups that are registered on this interface.