Filter
Top Products
- 562 -
Default Setting
0
Command Mode
Interface Config
10.3.2.13 ipv6 nd other-config-flag
This command sets the “other stateful configuration” flag in router advertisements sent from the interface.
Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
no – This command resets the “other stateful configuration” flag back to its default value in router
advertisements sent from the interface.
Default Setting
False
Command Mode
Interface Config
10.3.2.14 ipv6 nd ra-interval
This command sets the transmission interval between router advertisements.
Syntax
ipv6 nd ra-interval <4 – 1800 >
no ipv6 nd ra-interval
no – This command sets router advertisement interval to the default.
Default Setting
600
Command Mode
Interface Config