Filter
Top Products
- 601 -
no - This command cancel to set the RIPngplit horizon mode and sets none mode.
Default Setting
Simple
Command Mode
IPv6 Router RIP Config
10.5.2.8 redistribute
This command configures RIPng protocol to redistribute routes from the specified source
protocol/routers. Source protocols have OSPF, Static, and Connetced.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
no redistribute {ospf | static | connected} [metric]
<1 - 15> - a value for metric.
no - This command de-configures RIPng protocol to redistribute routes from the specified source
protocol/routers.
Default Setting
Metric – not-configured
Command Mode
IPv6 Router RIP Config
10.5.2.9 ipv6 rip timer
The user can go to the CLI Global Configuration Mode to set ipv6 rip timer, use the ipv6 rip timer
{update|garbage|info} <5-2147483647> global configuration command. Use the no ipv6 rip timer
{update|garbage|info} return to the default value.
Syntax
ipv6 rip timer {update|garbage|info} <5-2147483647>
no ipv6 rip timer {update|garbage|info}
update - This command sets to the RIPng update time.