Filter
Top Products
- 652 -
Non-Configurable Data
Slot/Port - The physical interface for which data is being displayed.
Interface Mode - This specifies the administrative mode via which Double VLAN Tagging can be
enabled or disabled. The default value for this is Disabled.
Interface EtherType - The two-byte hex EtherType to be used as the first 16 bits of the DVlan tag.
• 802.1Q Tag - Commonly used tag representing 0x8100
• vMAN Tag - Commonly used tag representing 0x88A8
• Custom Tag - Configure the EtherType in any range from (0 to 65535)
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.2.7 Defining sFlow
11.2.7.1 Configuring sFlow Agent Summary Configuration Page