Filter
Top Products
- 778 -
VLAN Id - Specifies the VLAN id associated with a particular policy type.
Priority - Specifies the priority associated with a particular policy type.
DSCP - Specifies the DSCP associated with a particular policy type.
Unknown Bit Status - Specifies the unknown bit associated with a particular policy type.
Tagged Bit Status - Specifies the tagged bit associated with a particular policy type.
Inventory Information - Specifies if location TLV is received in LLDP frames on this port.
Hardware Revision - Specifies hardware version of the remote device.
Firmware Revision - Specifies Firmware version of the remote device.
Software Revision - Specifies Software version of the remote device.
Serial Number - Specifies serial number of the remote device.
Manufacturer Name - Specifies manufacturers name of the remote device.
Model Name - Specifies model name of the remote device.
Asset ID - Specifies asset id of the remote device.
Location Information - Specifies if location TLV is received in LLDP frames on this port.
Sub Type - Specifies type of location information.
Location Information - Specifies the location information as a string for given type of location id.
Extended PoE
- Specifies if remote device is a PoE device.
Device Type - Specifies remote device's PoE device type connected to this port.
Extended PoE PSE - Specifies if extended PSE TLV is received in LLDP frame on this port.
Available - Specifies the remote ports PSE power value in tenths of watts.
Source - Specifies the remote ports PSE power source.
Priority - Specifies the remote ports PSE power priority.
Extended PoE PD - Specifies if extended PD TLV is received in LLDP frame on this port.
Required - Specifies the remote port's PD power requirement.
Source - Specifies the remote port's PD power source.
Priority - Specifies the remote port's PD power priority.
Command Buttons
Refresh - Updates the information on the page.
11.3.24 Managing VTP
11.3.24.1 Configuring VTP Configuration Page