Filter
Top Products
- 847 -
Backend State - This field displays the current state of the backend authentication state machine.
Possible values are:
"Request"
"Response"
"Success"
"Fail"
"Timeout"
"Initialize"
"Idle"
VLAN Assigned - Displays the VLAN ID assigned to the selected interface by the Authenticator.
Note: This field is displayed only when the port control mode of the selected interface is not
MAC-based.
VLAN Assigned Reason - Displays the reason for the VLAN ID assigned by the authenticator to the
selected interface. Possible values are:
• Radius
• Unauth
• Default
• Not Assigned
Maximum Users - Displays the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. This field is configurable. The maximum users value is in
range of 1 to 16.
Maximum Users - Displays the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. This field is configurable. The maximum users value is in
range of 1 to 16.
Unauthenticated VLAN ID - Displays the Unauthenticated VLAN ID for the selected port. The valid
range is 0 to 3965.
Session Timeout - Displays the Session Timeout set by the RADIUS Server for the selected port.
Note: This field is displayed only when the port control mode of the selected port is not MAC-based.
Session Termination Action - Displays the Termination Action set by the RADIUS Server for the
selected port. Possible values are:
• Default
• Reauthenticate
If the termination action is Default then, at the end of the session, the client details are initialized.
Otherwise, re-authentication is attempted. Note: This field is displayed only when the port control
mode of the selected port is not MAC-based.
Command Buttons
Refresh - Update the information on the page.
11.5.1.4 Viewing Access Control Summary Page