Filter
Top Products
- 874 -
• Stale - More than ReachableTime milliseconds have elapsed since the last positive
confirmation was received that the forward path was functioning properly. While in STALE
state, the device takes no action until a packet is sent.
• Delay - More than ReachableTime milliseconds have elapsed since the last positive
confirmation was received that the forward path was functioning properly. A packet was sent
within the last DELAY_FIRST_PROBE_TIME seconds. If no reachability confirmation is
received within DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, send a
neighbor solicitation message and change the state to PROBE.
• Probe - A reachability confirmation is actively sought by resending neighbor solicitation
messages every RetransTimer milliseconds until a reachability confirmation is received.
Last Updated - Time since the address was confirmed to be reachable.
Command Buttons
Refresh - Refreshes the screen with most recent data.
Clear IPv6 Neighbors - Clear IPv6 neighbors on selected interface or all interfaces.
11.6.6 Viewing IPv6 Static Neighbor Table Information Page
Configurable Data
IPv6 Address - Specifies the IPv6 address of neighbor.
MAC Address - Specifies the IPv6 address of neighbor.
Non-Configurable Data
IPv6 Address - Display the IPv6 address of current IPv6 neighbor table.
MAC Address - Display the MAC address of current IPv6 neighbor table.
Command Buttons
Add - Add the IPv6 neighbor.
Delete - Delete the IPv6 neighbor.
Refresh - Refreshes the screen with most recent data.