Filter
Top Products
- 877 -
been a change in a router's link state database, and to compare the link-state databases of two
routers.
AS_OPAQUE LSA Count - The number of opaque LSAs with domain wide flooding scope.
AS_OPAQUE LSA Checksum - The sum of the LS checksums of the opaque LSAs with domain
wide flooding scope. This sum can be used to determine if there has been a change in a router's link
state database, and to compare the link-state databases of two routers. This value is in hexadecimal.
New LSAs Originated - In any given OSPFv3 area, a router will originate several LSAs. Each router
originates a router-LSA. If the router is also the Designated Router for any of the area's networks, it
will originate network-LSAs for those networks. This value represents the number of LSAs originated
by this router.
LSAs Received - The number of LSAs (link state advertisements) received that were determined to
be new instantiations. This number does not include newer instantiations of self-originated LSAs.
LSA Count - The total number of link state advertisements currently in the link state database.
Maximum Number of LSAs - The maximum number of LSAs that OSPF can store.
LSA High Water Mark - The maximum size of the link state database since the system started.
Retransmit List Entries - The total number of LSAs waiting to be acknowledged by all neighbors. An
LSA may be pending acknowledgment from more than one neighbor.
Maximum Number of Retransmit Entries - The maximum number of LSAs that can be waiting for
acknowledgment at any given time.
Retransmit Entries High Water Mark - The highest number of LSAs that have been waiting for
acknowledgment.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.6.7.2 Configuring OSPFv3 Area Configuration Page
Selection Criteria
Area ID - Select the area to be configured.
Configurable Data