Filter
Top Products
- 880 -
Selection Criteria
Area ID - Selects the area for which data is to be configured.
Configurable Data
IPv6 Prefix - Enter the IPv6 Prefix/Prefix Length for the address range for the selected area.
LSDB Type - Select the type of Link Advertisement associated with the specified area and address
range. The default type is 'Network Summary'.
Advertisement - Select enable or disable from the pulldown menu. If you selected enable the
address range will be advertised outside the area via a Network Summary LSA. The default is enable.
Non-Configurable Data
Area ID - The OSPFv3 area.
IPv6 Prefix - The IPv6 Prefix of an address range for the area.
LSDB Type - The Link Advertisement type for the address range and area.
Advertisement - The Advertisement mode for the address range and area.
Command Buttons
Create New Area Range - Send the updated configuration to the switch. Configuration changes take
effect immediately. These changes will not be retained across a power cycle unless a save is
performed. The new address range will be added to the display in the non-configurable data area.
Delete - Removes the specified address range from the area configuration.
11.6.7.5 Configuring OSPFv3 Interface Configuration Page