Filter
Top Products
- 90 -
7.2.6.5 ip igmp snooping max-response-time
The user can go to the CLI Interface Global/Interface Configuration Mode to set the IGMP Maximum
Response time for the system, on a particular interface, use the ip igmp snooping max-response-time
<1-25> global/interface configuration command. Use the no ip igmp snooping max-response-time
return to default value 10
Syntax
ip igmp snooping max-response-time <1-25>
no ip igmp snooping max-response-time
<1-25> -- This value must be less than the IGMP Query Interval time value. The range is 1 to 25
seconds.
Default Setting
10
Command Mode
Global Config
Interface Config
7.2.6.6 ip igmp snooping mcrtrexpiretime
The user can go to the CLI Interface Global/Interface Configuration Mode to set the Multicast Router
Present Expiration time for the system or on a particular interface, use the ip igmp snooping
mcrtrexpiretime <0-3600> global/interface configuration command. Use the no ip igmp snooping
mcrtrexpiretime to return to default value 0.
Syntax
ip igmp snooping mcrtrexpiretime <0-3600>
no ip igmp snooping mcrtrexpiretime
<0-3600> -- The range is 0 to 3600 seconds. A value of 0 indicates an infinite time-out, i.e. no
expiration.
Default Setting
0
Command Mode
Global Config
Interface Config